Continuous Rapid Tempering of an Induction hardened Crank shaft The case file describes the introduction of a Pyromaitre Continuous Conveyor Oven to temper Induction hardened Forged Steel Crank shafts rapidly in less than an hour (cycle time -In to Out). This...
Rapid heating is the process by which a material can be heated to precise temperatures in a short period of time, and it has many uses. This article will summarize how PYRO Rapid Heat Transfer transfers heat to metal parts using an ultrahigh rate air convection...
Best ovens on the market are now available within 4 weeks ! Including: CQI-9, Dynamic Heat Loss Control, Closed Weave Mesh Belt Conveyor, Inlet / Outlet chute Other options can be added upon request Models...
Thanks a lot for visiting us during the FNA 2020! Pyro is specialized in continuous ovens for stress relieving and tempering applications. Our design and expertise allow for : Up to 70% in footprint reduction 3 to 10 folds time reduction due to heat transfer accuracy...
THE 13 TONS /// 30,000 LBS OVEN Here are some of the features : 2.8m wide x 18.3m long /// 110″ wide x 60′ long 13 tons / hour /// 30,000 lbs / hour 2350 kW /// 8,000,000 BTU 540°C /// 1000°F +/- 5°C /// +/-10°F uniformity Process 20mm /// 3/4″ wire...
One of the challenges we face when analyzing steel parts such as springs is their complex geometrical configurations. It is therefore difficult, dare I say impossible in the case of springs, to directly assess the latter and measure their hardness. In the best of...
